Verified ISO-IEC-27005-Risk-Manager exam dumps Q&As with Correct 62 Questions and Answers
PECB ISO-IEC-27005-Risk-Manager Test Engine PDF - All Free Dumps from ITExamDownload
NEW QUESTION # 21
Scenario 8: Biotide is a pharmaceutical company that produces medication for treating different kinds of diseases. The company was founded in 1997, and since then it has contributed in solving some of the most challenging healthcare issues.
As a pharmaceutical company, Biotide operates in an environment associated with complex risks. As such, the company focuses on risk management strategies that ensure the effective management of risks to develop high-quality medication. With the large amount of sensitive information generated from the company, managing information security risks is certainly an important part of the overall risk management process. Biotide utilizes a publicly available methodology for conducting risk assessment related to information assets. This methodology helps Biotide to perform risk assessment by taking into account its objectives and mission. Following this method, the risk management process is organized into four activity areas, each of them involving a set of activities, as provided below.
1. Activity area 1: The organization determines the criteria against which the effects of a risk occurring can be evaluated. In addition, the impacts of risks are also defined.
2. Activity area 2: The purpose of the second activity area is to create information asset profiles. The organization identifies critical information assets, their owners, as well as the security requirements for those assets. After determining the security requirements, the organization prioritizes them. In addition, the organization identifies the systems that store, transmit, or process information.
3. Activity area 3: The organization identifies the areas of concern which initiates the risk identification process. In addition, the organization analyzes and determines the probability of the occurrence of possible threat scenarios.
4. Activity area 4: The organization identifies and evaluates the risks. In addition, the criteria specified in activity area 1 is reviewed and the consequences of the areas of concerns are evaluated. Lastly, the level of identified risks is determined.
The table below provides an example of how Biotide assesses the risks related to its information assets following this methodology:
Based on the scenario above, answer the following question:
Which risk assessment methodology does Biotide use?
- A. OCTAVE-S
- B. MEHARI
- C. OCTAVE Allegro
Answer: C
Explanation:
Biotide uses the OCTAVE Allegro methodology for risk assessment. This is determined based on the description of the activities mentioned in the scenario. OCTAVE Allegro is a streamlined approach specifically designed to help organizations perform risk assessments that are efficient and effective, particularly when handling information assets. The methodology focuses on a thorough examination of information assets, the threats they face, and the impact of those threats.
Activity Area 1: OCTAVE Allegro defines the criteria for evaluating the impact of risks, which is consistent with determining the risk effects' evaluation criteria in the scenario.
Activity Area 2: In OCTAVE Allegro, a critical step is creating profiles for information assets, identifying their owners, and determining security requirements. This aligns with the activity in which Biotide identifies critical assets, their owners, and their security needs.
Activity Area 3: Identifying areas of concern that initiate risk identification and analyzing threat scenarios is central to OCTAVE Allegro. This is reflected in the activity of identifying areas of concern and determining the likelihood of threats.
Activity Area 4: Evaluating the risks, reviewing criteria, and determining risk levels corresponds to the latter stages of OCTAVE Allegro, where risks are prioritized based on the likelihood and impact, and risk management strategies are formulated accordingly.
The steps outlined align with the OCTAVE Allegro approach, which focuses on understanding and addressing information security risks comprehensively and in line with organizational objectives. Hence, option A, OCTAVE Allegro, is the correct answer.
ISO/IEC 27005:2018 emphasizes the importance of using structured methodologies for information security risk management, like OCTAVE Allegro, to ensure that risks are consistently identified, assessed, and managed in accordance with organizational risk tolerance and objectives.
NEW QUESTION # 22
Scenario 7: Adstry is a business growth agency that specializes in digital marketing strategies. Adstry helps organizations redefine the relationships with their customers through innovative solutions. Adstry is headquartered in San Francisco and recently opened two new offices in New York. The structure of the company is organized into teams which are led by project managers. The project manager has the full power in any decision related to projects. The team members, on the other hand, report the project's progress to project managers.
Considering that data breaches and ad fraud are common threats in the current business environment, managing risks is essential for Adstry. When planning new projects, each project manager is responsible for ensuring that risks related to a particular project have been identified, assessed, and mitigated. This means that project managers have also the role of the risk manager in Adstry. Taking into account that Adstry heavily relies on technology to complete their projects, their risk assessment certainly involves identification of risks associated with the use of information technology. At the earliest stages of each project, the project manager communicates the risk assessment results to its team members.
Adstry uses a risk management software which helps the project team to detect new potential risks during each phase of the project. This way, team members are informed in a timely manner for the new potential risks and are able to respond to them accordingly. The project managers are responsible for ensuring that the information provided to the team members is communicated using an appropriate language so it can be understood by all of them.
In addition, the project manager may include external interested parties affected by the project in the risk communication. If the project manager decides to include interested parties, the risk communication is thoroughly prepared. The project manager firstly identifies the interested parties that should be informed and takes into account their concerns and possible conflicts that may arise due to risk communication. The risks are communicated to the identified interested parties while taking into consideration the confidentiality of Adstry's information and determining the level of detail that should be included in the risk communication. The project managers use the same risk management software for risk communication with external interested parties since it provides a consistent view of risks. For each project, the project manager arranges regular meetings with relevant interested parties of the project, they discuss the detected risks, their prioritization, and determine appropriate treatment solutions. The information taken from the risk management software and the results of these meetings are documented and are used for decision-making processes. In addition, the company uses a computerized documented information management system for the acquisition, classification, storage, and archiving of its documents.
Based on the scenario above, answer the following question:
Which of the following documented information management systems does Adstry use?
- A. Cloud-based documented management system
- B. Content management system
- C. Electronic documented management system
Answer: C
Explanation:
Adstry uses a computerized documented information management system for the acquisition, classification, storage, and archiving of documents. This type of system is typically referred to as an Electronic Document Management System (EDMS). An EDMS is designed to handle digital documents and support the management of information, ensuring that documents are stored, retrieved, and maintained efficiently. Option B (Content management system) is incorrect because it primarily manages web content rather than organizational documents. Option C (Cloud-based documented management system) could be partially correct if the EDMS is hosted in the cloud, but the scenario does not specify this.
NEW QUESTION # 23
According to ISO/IEC 27005, what is the output of the documentation of risk management processes?
- A. Documented information that is necessary for the effectiveness of the information security risk assessment or risk treatment processes
- B. Documented information about the information security risk assessment and treatment results
- C. Knowledge on the information security risk assessment and treatment processes in accordance with clauses 7 and 8 of the standard
Answer: B
Explanation:
According to ISO/IEC 27005, the output of the documentation of risk management processes should include detailed information about the results of the risk assessment and the chosen risk treatment options. This ensures transparency and provides a clear record of the decision-making process related to information security risk management. Therefore, option B is the correct answer.
NEW QUESTION # 24
Scenario 1
The risk assessment process was led by Henry, Bontton's risk manager. The first step that Henry took was identifying the company's assets. Afterward, Henry created various potential incident scenarios. One of the main concerns regarding the use of the application was the possibility of being targeted by cyber attackers, as a great number of organizations were experiencing cyberattacks during that time. After analyzing the identified risks, Henry evaluated them and concluded that new controls must be implemented if the company wants to use the application. Among others, he stated that training should be provided to personnel regarding the use of the application and that awareness sessions should be conducted regarding the importance of protecting customers' personal data.
Lastly, Henry communicated the risk assessment results to the top management. They decided that the application will be used only after treating the identified risks.
According to scenario 1, Bontton wanted to use an application that ensures only authorized users have access to customers' personal dat a. Which information security principle does Bontton want to ensure in this case?
- A. Integrity
- B. Confidentiality
- C. Availability
Answer: B
Explanation:
In the context of information security, confidentiality refers to ensuring that information is accessible only to those who are authorized to have access. According to scenario 1, Bontton wanted to use an application that ensures only authorized users have access to customers' personal data. This directly aligns with the principle of confidentiality, as Bontton aims to protect personal data from unauthorized access or disclosure. This focus on restricting access to sensitive data to authorized personnel clearly indicates that the confidentiality of information is the primary concern in this case. Thus, the correct answer is C.
NEW QUESTION # 25
Scenario 2: Travivve is a travel agency that operates in more than 100 countries. Headquartered in San Francisco, the US, the agency is known for its personalized vacation packages and travel services. Travivve aims to deliver reliable services that meet its clients' needs. Considering the impact of information security in its reputation, Travivve decided to implement an information security management system (ISMS) based on ISO/IEC 27001. In addition, they decided to establish and implement an information security risk management program. Based on the priority of specific departments in Travivve, the top management decided to initially apply the risk management process only in the Sales Management Department. The process would be applicable for other departments only when introducing new technology.
Travivve's top management wanted to make sure that the risk management program is established based on the industry best practices. Therefore, they created a team of three members that would be responsible for establishing and implementing it. One of the team members was Travivve's risk manager who was responsible for supervising the team and planning all risk management activities. In addition, the risk manager was responsible for monitoring the program and reporting the monitoring results to the top management.
Initially, the team decided to analyze the internal and external context of Travivve. As part of the process of understanding the organization and its context, the team identified key processes and activities. Then, the team identified the interested parties and their basic requirements and determined the status of compliance with these requirements. In addition, the team identified all the reference documents that applied to the defined scope of the risk management process, which mainly included the Annex A of ISO/IEC 27001 and the internal security rules established by Travivve. Lastly, the team analyzed both reference documents and justified a few noncompliances with those requirements.
The risk manager selected the information security risk management method which was aligned with other approaches used by the company to manage other risks. The team also communicated the risk management process to all interested parties through previously established communication mechanisms. In addition, they made sure to inform all interested parties about their roles and responsibilities regarding risk management. Travivve also decided to involve interested parties in its risk management activities since, according to the top management, this process required their active participation.
Lastly, Travivve's risk management team decided to conduct the initial information security risk assessment process. As such, the team established the criteria for performing the information security risk assessment which included the consequence criteria and likelihood criteria.
Did Travivve's risk management team identify the basic requirements of interested parties in accordance with the guidelines of ISO/IEC 27005? Refer to scenario 2.
- A. No, the team should define the basic requirements of interested parties, but it should determine status of compliance with the requirements after implementing the risk treatment options
- B. Yes, the team identified the basic requirements of interested parties and determined the status of compliance with those requirements as recommended by ISO/IEC 27005
- C. No, the team should use only the organization's internal security rules to determine the status of compliance with the basic requirements of interested parties
Answer: B
Explanation:
According to ISO/IEC 27005, understanding the organization and its context, including the identification of interested parties and their requirements, is a critical part of the risk management process. The team at Travivve identified the interested parties and their basic requirements and determined the status of compliance with these requirements, which aligns with the guidelines provided by ISO/IEC 27005. This standard recommends that organizations should understand their context and stakeholders' requirements to effectively manage risks. Additionally, it is appropriate to evaluate compliance with requirements as part of the context analysis, rather than after implementing risk treatment options. Therefore, the team's approach was in accordance with ISO/IEC 27005, making option C the correct answer.
Reference:
ISO/IEC 27005:2018, Clause 7, "Context Establishment," which outlines the importance of identifying the context, including the interested parties and their requirements, as a basis for risk management.
NEW QUESTION # 26
Scenario 6: Productscape is a market research company headquartered in Brussels, Belgium. It helps organizations understand the needs and expectations of their customers and identify new business opportunities. Productscape's teams have extensive experience in marketing and business strategy and work with some of the best-known organizations in Europe. The industry in which Productscape operates requires effective risk management. Considering that Productscape has access to clients' confidential information, it is responsible for ensuring its security. As such, the company conducts regular risk assessments. The top management appointed Alex as the risk manager, who is responsible for monitoring the risk management process and treating information security risks.
The last risk assessment conducted was focused on information assets. The purpose of this risk assessment was to identify information security risks, understand their level, and take appropriate action to treat them in order to ensure the security of their systems. Alex established a team of three members to perform the risk assessment activities. Each team member was responsible for specific departments included in the risk assessment scope. The risk assessment provided valuable information to identify, understand, and mitigate the risks that Productscape faces.
Initially, the team identified potential risks based on the risk identification results. Prior to analyzing the identified risks, the risk acceptance criteria were established. The criteria for accepting the risks were determined based on Productscape's objectives, operations, and technology. The team created various risk scenarios and determined the likelihood of occurrence as "low," "medium," or "high." They decided that if the likelihood of occurrence for a risk scenario is determined as "low," no further action would be taken. On the other hand, if the likelihood of occurrence for a risk scenario is determined as "high" or "medium," additional controls will be implemented. Some information security risk scenarios defined by Productscape's team were as follows:
1. A cyber attacker exploits a security misconfiguration vulnerability of Productscape's website to launch an attack, which, in turn, could make the website unavailable to users.
2. A cyber attacker gains access to confidential information of clients and may threaten to make the information publicly available unless a ransom is paid.
3. An internal employee clicks on a link embedded in an email that redirects them to an unsecured website, installing a malware on the device.
The likelihood of occurrence for the first risk scenario was determined as "medium." One of the main reasons that such a risk could occur was the usage of default accounts and password. Attackers could exploit this vulnerability and launch a brute-force attack. Therefore, Productscape decided to start using an automated "build and deploy" process which would test the software on deploy and minimize the likelihood of such an incident from happening. However, the team made it clear that the implementation of this process would not eliminate the risk completely and that there was still a low possibility for this risk to occur. Productscape documented the remaining risk and decided to monitor it for changes.
The likelihood of occurrence for the second risk scenario was determined as "medium." Productscape decided to contract an IT company that would provide technical assistance and monitor the company's systems and networks in order to prevent such incidents from happening.
The likelihood of occurrence for the third risk scenario was determined as "high." Thus, Productscape decided to include phishing as a topic on their information security training sessions. In addition, Alex reviewed the controls of Annex A of ISO/IEC 27001 in order to determine the necessary controls for treating this risk. Alex decided to implement control A.8.23 Web filtering which would help the company to reduce the risk of accessing unsecure websites. Although security controls were implemented to treat the risk, the level of the residual risk still did not meet the risk acceptance criteria defined in the beginning of the risk assessment process. Since the cost of implementing additional controls was too high for the company, Productscape decided to accept the residual risk. Therefore, risk owners were assigned the responsibility of managing the residual risk.
Based on scenario 6, Alex reviewed the controls of Annex A of ISO/IEC 27001 to determine the necessary controls for treating the risk described in the third risk scenario. According to the guidelines of ISO/IEC 27005, is this acceptable?
- A. Yes. organizations should select all controls from a chosen control set that are necessary for treating the risks
- B. No, organizations should define custom controls that accurately reflect the selected information security risk treatment options
- C. No, Annex A controls should be used as a control set only if the organization seeks compliance to ISO/IEC 27001
Answer: A
Explanation:
According to ISO/IEC 27005, organizations can use any set of controls to treat identified risks as long as they are appropriate and necessary for managing those risks. Annex A of ISO/IEC 27001 provides a comprehensive set of controls that can be used to mitigate various information security risks. In this scenario, Alex reviewed the controls from Annex A of ISO/IEC 27001 and selected control A.8.23 (Web filtering) to treat the risk associated with phishing and accessing unsecured websites. This approach aligns with ISO/IEC 27005, which allows selecting relevant controls from any set to effectively manage risks. Therefore, option C is the correct answer.
Reference:
ISO/IEC 27005:2018, Clause 8.6, "Risk Treatment," which allows for selecting controls from a set, such as Annex A of ISO/IEC 27001, to treat risks appropriately.
NEW QUESTION # 27
Scenario 1
The risk assessment process was led by Henry, Bontton's risk manager. The first step that Henry took was identifying the company's assets. Afterward, Henry created various potential incident scenarios. One of the main concerns regarding the use of the application was the possibility of being targeted by cyber attackers, as a great number of organizations were experiencing cyberattacks during that time. After analyzing the identified risks, Henry evaluated them and concluded that new controls must be implemented if the company wants to use the application. Among others, he stated that training should be provided to personnel regarding the use of the application and that awareness sessions should be conducted regarding the importance of protecting customers' personal data.
Lastly, Henry communicated the risk assessment results to the top management. They decided that the application will be used only after treating the identified risks.
Henry concluded that one of the main concerns regarding the use of the application for online ordering was cyberattacks. What did Henry identify in this case? Refer to scenario 1.\
- A. The vulnerabilities of an asset
- B. A threat
- C. The consequences of a potential security incident
Answer: B
Explanation:
In this scenario, Henry identifies "cyberattacks" as one of the main concerns related to the use of the application for online ordering. According to ISO/IEC 27005, a "threat" is any potential cause of an unwanted incident that may result in harm to a system or organization. In this context, cyberattacks are considered a threat because they represent a potential cause that could compromise the security of the application. Henry's identification of cyberattacks as a primary concern aligns with recognizing a specific threat that could exploit vulnerabilities within the system.
Reference:
ISO/IEC 27005:2018, Clause 8.3, "Threat identification," which provides guidance on identifying threats that could affect the organization's information assets.
ISO/IEC 27001:2013, Clause 6.1.2, "Information Security Risk Assessment," where identifying threats is part of the risk assessment process.
These answers are verified based on the standards' definitions and guidelines, providing a comprehensive understanding of how ISO/IEC 27005 is used within the context of ISO/IEC 27001.
NEW QUESTION # 28
Scenario 4: In 2017, seeing that millions of people turned to online shopping, Ed and James Cordon founded the online marketplace for footwear called Poshoe. In the past, purchasing pre-owned designer shoes online was not a pleasant experience because of unattractive pictures and an inability to ascertain the products' authenticity. However, after Poshoe's establishment, each product was well advertised and certified as authentic before being offered to clients. This increased the customers' confidence and trust in Poshoe's products and services. Poshoe has approximately four million users and its mission is to dominate the second-hand sneaker market and become a multi-billion dollar company.
Due to the significant increase of daily online buyers, Poshoe's top management decided to adopt a big data analytics tool that could help the company effectively handle, store, and analyze dat a. Before initiating the implementation process, they decided to conduct a risk assessment. Initially, the company identified its assets, threats, and vulnerabilities associated with its information systems. In terms of assets, the company identified the information that was vital to the achievement of the organization's mission and objectives. During this phase, the company also detected a rootkit in their software, through which an attacker could remotely access Poshoe's systems and acquire sensitive data.
The company discovered that the rootkit had been installed by an attacker who had gained administrator access. As a result, the attacker was able to obtain the customers' personal data after they purchased a product from Poshoe. Luckily, the company was able to execute some scans from the target device and gain greater visibility into their software's settings in order to identify the vulnerability of the system.
The company initially used the qualitative risk analysis technique to assess the consequences and the likelihood and to determine the level of risk. The company defined the likelihood of risk as "a few times in two years with the probability of 1 to 3 times per year." Later, it was decided that they would use a quantitative risk analysis methodology since it would provide additional information on this major risk. Lastly, the top management decided to treat the risk immediately as it could expose the company to other issues. In addition, it was communicated to their employees that they should update, secure, and back up Poshoe's software in order to protect customers' personal information and prevent unauthorized access from attackers.
According to scenario 4, the top management of Poshoe decided to treat the risk immediately after conducting the risk analysis. Is this in compliance with risk management best practices?
- A. Yes. risk treatment options should be implemented immediately after analyzing the risk, as the risk could expose the company to other security threats
- B. No, risk evaluation should be performed before making any decision regarding risk treatment
- C. No, the risk should be communicated to all the interested parties before making any decision regarding risk treatment
Answer: B
Explanation:
According to ISO/IEC 27005, after conducting risk analysis, the next step in the risk management process should be risk evaluation. Risk evaluation involves comparing the estimated level of risk against risk criteria established by the organization to determine the significance of the risk and decide whether it is acceptable or needs treatment. Only after evaluating the risk should an organization decide on the appropriate risk treatment options. Therefore, in the scenario, deciding to treat the risk immediately after conducting the risk analysis, without first performing a risk evaluation, is not in compliance with risk management best practices. Option A is the correct answer.
Reference:
ISO/IEC 27005:2018, Clause 8.5, "Risk Evaluation," which describes the process of evaluating risks after analysis to determine if they require treatment.
NEW QUESTION # 29
Scenario 8: Biotide is a pharmaceutical company that produces medication for treating different kinds of diseases. The company was founded in 1997, and since then it has contributed in solving some of the most challenging healthcare issues.
As a pharmaceutical company, Biotide operates in an environment associated with complex risks. As such, the company focuses on risk management strategies that ensure the effective management of risks to develop high-quality medication. With the large amount of sensitive information generated from the company, managing information security risks is certainly an important part of the overall risk management process. Biotide utilizes a publicly available methodology for conducting risk assessment related to information assets. This methodology helps Biotide to perform risk assessment by taking into account its objectives and mission. Following this method, the risk management process is organized into four activity areas, each of them involving a set of activities, as provided below.
1. Activity area 1: The organization determines the criteria against which the effects of a risk occurring can be evaluated. In addition, the impacts of risks are also defined.
2. Activity area 2: The purpose of the second activity area is to create information asset profiles. The organization identifies critical information assets, their owners, as well as the security requirements for those assets. After determining the security requirements, the organization prioritizes them. In addition, the organization identifies the systems that store, transmit, or process information.
3. Activity area 3: The organization identifies the areas of concern which initiates the risk identification process. In addition, the organization analyzes and determines the probability of the occurrence of possible threat scenarios.
4. Activity area 4: The organization identifies and evaluates the risks. In addition, the criteria specified in activity area 1 is reviewed and the consequences of the areas of concerns are evaluated. Lastly, the level of identified risks is determined.
The table below provides an example of how Biotide assesses the risks related to its information assets following this methodology:
Based on scenario 8, how should Biotide use the criteria defined in the activity area 1?
- A. To determine the probability of threat scenarios
- B. To evaluate the potential impact of the risk on Biotide's objectives
- C. To identify the assets on which information is stored
Answer: B
Explanation:
According to ISO/IEC 27005, which provides guidelines for information security risk management, the criteria defined in Activity Area 1 are used to establish the foundation for evaluating the effects of a risk event on an organization's objectives. This is the first step in the risk management process, where the organization must identify its risk evaluation criteria, including the impact levels and their corresponding definitions.
In the context of Biotide, Activity Area 1 involves determining the criteria against which the effects of a risk occurring can be evaluated and defining the impacts of those risks. This directly aligns with ISO/IEC 27005 guidance, where the purpose of setting criteria is to ensure that the potential impact of any risk on the organization's objectives, such as reputation, customer confidence, and legal implications, is comprehensively understood and appropriately managed.
Option A, "To evaluate the potential impact of the risk on Biotide's objectives," is correct because it accurately describes the purpose of defining such criteria: to provide a consistent basis for assessing how various risk scenarios might affect the organization's ability to meet its strategic and operational goals.
Options B and C, which focus on identifying assets or determining the probability of threats, are related to later stages in the risk management process (specifically, Activities 2 and 3), where information assets are profiled and potential threat scenarios are analyzed. Therefore, these do not correspond to the initial criteria definition purpose outlined in Activity Area 1.
NEW QUESTION # 30
Scenario 5: Detika is a private cardiology clinic in Pennsylvania, the US. Detika has one of the most advanced healthcare systems for treating heart diseases. The clinic uses sophisticated apparatus that detects heart diseases in early stages. Since 2010, medical information of Detika's patients is stored on the organization's digital systems. Electronic health records (EHR), among others, include patients' diagnosis, treatment plan, and laboratory results.
Storing and accessing patient and other medical data digitally was a huge and a risky step for Detik a. Considering the sensitivity of information stored in their systems, Detika conducts regular risk assessments to ensure that all information security risks are identified and managed. Last month, Detika conducted a risk assessment which was focused on the EHR system. During risk identification, the IT team found out that some employees were not updating the operating systems regularly. This could cause major problems such as a data breach or loss of software compatibility. In addition, the IT team tested the software and detected a flaw in one of the software modules used. Both issues were reported to the top management and they decided to implement appropriate controls for treating the identified risks. They decided to organize training sessions for all employees in order to make them aware of the importance of the system updates. In addition, the manager of the IT Department was appointed as the person responsible for ensuring that the software is regularly tested.
Another risk identified during the risk assessment was the risk of a potential ransomware attack. This risk was defined as low because all their data was backed up daily. The IT team decided to accept the actual risk of ransomware attacks and concluded that additional measures were not required. This decision was documented in the risk treatment plan and communicated to the risk owner. The risk owner approved the risk treatment plan and documented the risk assessment results.
Following that, Detika initiated the implementation of new controls. In addition, one of the employees of the IT Department was assigned the responsibility for monitoring the implementation process and ensure the effectiveness of the security controls. The IT team, on the other hand, was responsible for allocating the resources needed to effectively implement the new controls.
Based on scenario 5, which risk treatment option did Detika select to treat the risk of a potential ransomware attack?
- A. Risk avoidance
- B. Risk retention
- C. Risk sharing
Answer: B
Explanation:
Risk retention involves accepting the risk when its likelihood or impact is low, or when the cost of mitigating the risk is higher than the benefit. In the scenario, Detika decided to accept the risk of a potential ransomware attack because the data is backed up daily, and additional measures were deemed unnecessary. This decision aligns with the risk retention strategy, where an organization chooses to live with the risk rather than apply further controls. Option A is the correct answer.
Reference:
ISO/IEC 27005:2018, Clause 8.6, "Risk Treatment," which discusses risk retention as an option for managing risks deemed acceptable by the organization.
NEW QUESTION # 31
Scenario 6: Productscape is a market research company headquartered in Brussels, Belgium. It helps organizations understand the needs and expectations of their customers and identify new business opportunities. Productscape's teams have extensive experience in marketing and business strategy and work with some of the best-known organizations in Europe. The industry in which Productscape operates requires effective risk management. Considering that Productscape has access to clients' confidential information, it is responsible for ensuring its security. As such, the company conducts regular risk assessments. The top management appointed Alex as the risk manager, who is responsible for monitoring the risk management process and treating information security risks.
The last risk assessment conducted was focused on information assets. The purpose of this risk assessment was to identify information security risks, understand their level, and take appropriate action to treat them in order to ensure the security of their systems. Alex established a team of three members to perform the risk assessment activities. Each team member was responsible for specific departments included in the risk assessment scope. The risk assessment provided valuable information to identify, understand, and mitigate the risks that Productscape faces.
Initially, the team identified potential risks based on the risk identification results. Prior to analyzing the identified risks, the risk acceptance criteria were established. The criteria for accepting the risks were determined based on Productscape's objectives, operations, and technology. The team created various risk scenarios and determined the likelihood of occurrence as "low," "medium," or "high." They decided that if the likelihood of occurrence for a risk scenario is determined as "low," no further action would be taken. On the other hand, if the likelihood of occurrence for a risk scenario is determined as "high" or "medium," additional controls will be implemented. Some information security risk scenarios defined by Productscape's team were as follows:
1. A cyber attacker exploits a security misconfiguration vulnerability of Productscape's website to launch an attack, which, in turn, could make the website unavailable to users.
2. A cyber attacker gains access to confidential information of clients and may threaten to make the information publicly available unless a ransom is paid.
3. An internal employee clicks on a link embedded in an email that redirects them to an unsecured website, installing a malware on the device.
The likelihood of occurrence for the first risk scenario was determined as "medium." One of the main reasons that such a risk could occur was the usage of default accounts and password. Attackers could exploit this vulnerability and launch a brute-force attack. Therefore, Productscape decided to start using an automated "build and deploy" process which would test the software on deploy and minimize the likelihood of such an incident from happening. However, the team made it clear that the implementation of this process would not eliminate the risk completely and that there was still a low possibility for this risk to occur. Productscape documented the remaining risk and decided to monitor it for changes.
The likelihood of occurrence for the second risk scenario was determined as "medium." Productscape decided to contract an IT company that would provide technical assistance and monitor the company's systems and networks in order to prevent such incidents from happening.
The likelihood of occurrence for the third risk scenario was determined as "high." Thus, Productscape decided to include phishing as a topic on their information security training sessions. In addition, Alex reviewed the controls of Annex A of ISO/IEC 27001 in order to determine the necessary controls for treating this risk. Alex decided to implement control A.8.23 Web filtering which would help the company to reduce the risk of accessing unsecure websites. Although security controls were implemented to treat the risk, the level of the residual risk still did not meet the risk acceptance criteria defined in the beginning of the risk assessment process. Since the cost of implementing additional controls was too high for the company, Productscape decided to accept the residual risk. Therefore, risk owners were assigned the responsibility of managing the residual risk.
Based on scenario 6, Productscape decided to accept the residual risk and risk owners were assigned the responsibility of managing this risk.
Based on the guidelines of ISO/IEC 27005, is this acceptable?
- A. No, the top management should manage the residual risk
- B. No, risk approvers are responsible for managing the residual risk after accepting it
- C. Yes, risk owners must be aware of the residual risk and accept the responsibility for managing it
Answer: C
Explanation:
ISO/IEC 27005 specifies that once a risk treatment has been applied and residual risk remains, it is essential that the risk owner is aware of this residual risk and accepts the responsibility for managing it. The risk owner is the individual or entity accountable for managing specific risks within the organization. In Scenario 6, Productscape decided to accept the residual risk and assigned risk owners the responsibility for managing it, which is fully compliant with ISO/IEC 27005. Thus, the correct answer is A.
Reference:
ISO/IEC 27005:2018, Clause 8.6, "Risk Treatment," which states that risk owners should be aware of and accept responsibility for managing residual risks.
NEW QUESTION # 32
Scenario 8: Biotide is a pharmaceutical company that produces medication for treating different kinds of diseases. The company was founded in 1997, and since then it has contributed in solving some of the most challenging healthcare issues.
As a pharmaceutical company, Biotide operates in an environment associated with complex risks. As such, the company focuses on risk management strategies that ensure the effective management of risks to develop high-quality medication. With the large amount of sensitive information generated from the company, managing information security risks is certainly an important part of the overall risk management process. Biotide utilizes a publicly available methodology for conducting risk assessment related to information assets. This methodology helps Biotide to perform risk assessment by taking into account its objectives and mission. Following this method, the risk management process is organized into four activity areas, each of them involving a set of activities, as provided below.
1. Activity area 1: The organization determines the criteria against which the effects of a risk occurring can be evaluated. In addition, the impacts of risks are also defined.
2. Activity area 2: The purpose of the second activity area is to create information asset profiles. The organization identifies critical information assets, their owners, as well as the security requirements for those assets. After determining the security requirements, the organization prioritizes them. In addition, the organization identifies the systems that store, transmit, or process information.
3. Activity area 3: The organization identifies the areas of concern which initiates the risk identification process. In addition, the organization analyzes and determines the probability of the occurrence of possible threat scenarios.
4. Activity area 4: The organization identifies and evaluates the risks. In addition, the criteria specified in activity area 1 is reviewed and the consequences of the areas of concerns are evaluated. Lastly, the level of identified risks is determined.
The table below provides an example of how Biotide assesses the risks related to its information assets following this methodology:
Based on the table provided in scenario 8, did Biotide prioritize the security requirements for electronic health records?
- A. No, Biotide did not prioritize security requirements for electronic health records
- B. Yes, Biotide determined confidentiality as the most important security requirement for electronic health records
- C. Yes, Biotide prioritized the security requirements for electronic health records when prioritizing the areas of concern
Answer: B
Explanation:
Based on the table provided in Scenario 8, Biotide has prioritized the security requirements for its electronic health records. In Activity Area 2, the table clearly indicates that confidentiality is considered the most important security feature for electronic health records. This prioritization is based on the need to ensure that only authorized users have access to these critical information assets due to the sensitive nature of the data involved.
The emphasis on confidentiality aligns with ISO/IEC 27005 guidelines, which recommend prioritizing security requirements based on the impact assessment and the organization's risk management objectives. In this case, the potential impact of unauthorized access (breach of confidentiality) to electronic health records is high, which justifies Biotide's decision to prioritize confidentiality over other security requirements such as integrity or availability.
Option A is correct because it reflects the prioritization decision documented in the table, while options B and C are inaccurate as they either misrepresent the prioritization process or suggest that it did not occur.
NEW QUESTION # 33
Scenario 6: Productscape is a market research company headquartered in Brussels, Belgium. It helps organizations understand the needs and expectations of their customers and identify new business opportunities. Productscape's teams have extensive experience in marketing and business strategy and work with some of the best-known organizations in Europe. The industry in which Productscape operates requires effective risk management. Considering that Productscape has access to clients' confidential information, it is responsible for ensuring its security. As such, the company conducts regular risk assessments. The top management appointed Alex as the risk manager, who is responsible for monitoring the risk management process and treating information security risks.
The last risk assessment conducted was focused on information assets. The purpose of this risk assessment was to identify information security risks, understand their level, and take appropriate action to treat them in order to ensure the security of their systems. Alex established a team of three members to perform the risk assessment activities. Each team member was responsible for specific departments included in the risk assessment scope. The risk assessment provided valuable information to identify, understand, and mitigate the risks that Productscape faces.
Initially, the team identified potential risks based on the risk identification results. Prior to analyzing the identified risks, the risk acceptance criteria were established. The criteria for accepting the risks were determined based on Productscape's objectives, operations, and technology. The team created various risk scenarios and determined the likelihood of occurrence as "low," "medium," or "high." They decided that if the likelihood of occurrence for a risk scenario is determined as "low," no further action would be taken. On the other hand, if the likelihood of occurrence for a risk scenario is determined as "high" or "medium," additional controls will be implemented. Some information security risk scenarios defined by Productscape's team were as follows:
1. A cyber attacker exploits a security misconfiguration vulnerability of Productscape's website to launch an attack, which, in turn, could make the website unavailable to users.
2. A cyber attacker gains access to confidential information of clients and may threaten to make the information publicly available unless a ransom is paid.
3. An internal employee clicks on a link embedded in an email that redirects them to an unsecured website, installing a malware on the device.
The likelihood of occurrence for the first risk scenario was determined as "medium." One of the main reasons that such a risk could occur was the usage of default accounts and password. Attackers could exploit this vulnerability and launch a brute-force attack. Therefore, Productscape decided to start using an automated "build and deploy" process which would test the software on deploy and minimize the likelihood of such an incident from happening. However, the team made it clear that the implementation of this process would not eliminate the risk completely and that there was still a low possibility for this risk to occur. Productscape documented the remaining risk and decided to monitor it for changes.
The likelihood of occurrence for the second risk scenario was determined as "medium." Productscape decided to contract an IT company that would provide technical assistance and monitor the company's systems and networks in order to prevent such incidents from happening.
The likelihood of occurrence for the third risk scenario was determined as "high." Thus, Productscape decided to include phishing as a topic on their information security training sessions. In addition, Alex reviewed the controls of Annex A of ISO/IEC 27001 in order to determine the necessary controls for treating this risk. Alex decided to implement control A.8.23 Web filtering which would help the company to reduce the risk of accessing unsecure websites. Although security controls were implemented to treat the risk, the level of the residual risk still did not meet the risk acceptance criteria defined in the beginning of the risk assessment process. Since the cost of implementing additional controls was too high for the company, Productscape decided to accept the residual risk. Therefore, risk owners were assigned the responsibility of managing the residual risk.
Based on the scenario above, answer the following question:
Which risk treatment option was used for the first risk scenario?
- A. Risk avoidance
- B. Risk modification
- C. Risk sharing
Answer: B
Explanation:
Risk modification involves implementing measures to reduce the likelihood or impact of a risk. In the first risk scenario, Productscape decided to use an automated "build and deploy" process to reduce the likelihood of an attacker exploiting a security misconfiguration vulnerability. This action aims to lower the risk to an acceptable level, which is characteristic of risk modification. Option B (Risk avoidance) would involve eliminating the risk by avoiding the activity altogether, which is not what was done. Option C (Risk sharing) involves transferring some or all of the risk to a third party, which is not applicable in this scenario.
NEW QUESTION # 34
Scenario 3: Printary is an American company that offers digital printing services. Creating cost-effective and creative products, the company has been part of the printing industry for more than 30 years. Three years ago, the company started to operate online, providing greater flexibility for its clients. Through the website, clients could find information about all services offered by Printary and order personalized products. However, operating online increased the risk of cyber threats, consequently, impacting the business functions of the company. Thus, along with the decision of creating an online business, the company focused on managing information security risks. Their risk management program was established based on ISO/IEC 27005 guidelines and industry best practices.
Last year, the company considered the integration of an online payment system on its website in order to provide more flexibility and transparency to customers. Printary analyzed various available solutions and selected Pay0, a payment processing solution that allows any company to easily collect payments on their website. Before making the decision, Printary conducted a risk assessment to identify and analyze information security risks associated with the software. The risk assessment process involved three phases: identification, analysis, and evaluation. During risk identification, the company inspected assets, threats, and vulnerabilities. In addition, to identify the information security risks, Printary used a list of the identified events that could negatively affect the achievement of information security objectives. The risk identification phase highlighted two main threats associated with the online payment system: error in use and data corruption After conducting a gap analysis, the company concluded that the existing security controls were sufficient to mitigate the threat of data corruption. However, the user interface of the payment solution was complicated, which could increase the risk associated with user errors, and, as a result, impact data integrity and confidentiality.
Subsequently, the risk identification results were analyzed. The company conducted risk analysis in order to understand the nature of the identified risks. They decided to use a quantitative risk analysis methodology because it would provide more detailed information. The selected risk analysis methodology was consistent with the risk evaluation criteri a. Firstly, they used a list of potential incident scenarios to assess their potential impact. In addition, the likelihood of incident scenarios was defined and assessed. Finally, the level of risk was defined as low.
In the end, the level of risk was compared to the risk evaluation and acceptance criteria and was prioritized accordingly.
Based on scenario 3, Printary used a list of identified events that could negatively influence the achievement of its information security objectives to identify information security risks. Is this in compliance with the guidelines of ISO/IEC 27005?
- A. No, a list of risk scenarios with their consequences related to assets or events and their likelihood should be used to identity information security risks
- B. No. a list of risk sources, business processes. and business objectives should be used to identify information security risks
- C. Yes, a list of events that can negatively influence the achievement of information security objectives in the company should be used to identity information security risks
Answer: C
Explanation:
According to ISO/IEC 27005, identifying risks to information security involves recognizing events that could adversely affect the achievement of information security objectives. Using a list of events that could negatively impact these objectives is consistent with the risk identification process as outlined in ISO/IEC 27005. This approach focuses on identifying specific incidents or events that could result in security breaches or compromises, providing a clear understanding of the potential risks to the organization. Thus, Printary's use of a list of such events to identify information security risks complies with the standard's guidelines, making option B the correct answer.
Reference:
ISO/IEC 27005:2018, Clause 8.2, "Risk Identification," which states that the organization should identify the events that could compromise information security objectives.
NEW QUESTION # 35
Scenario 2: Travivve is a travel agency that operates in more than 100 countries. Headquartered in San Francisco, the US, the agency is known for its personalized vacation packages and travel services. Travivve aims to deliver reliable services that meet its clients' needs. Considering the impact of information security in its reputation, Travivve decided to implement an information security management system (ISMS) based on ISO/IEC 27001. In addition, they decided to establish and implement an information security risk management program. Based on the priority of specific departments in Travivve, the top management decided to initially apply the risk management process only in the Sales Management Department. The process would be applicable for other departments only when introducing new technology.
Travivve's top management wanted to make sure that the risk management program is established based on the industry best practices. Therefore, they created a team of three members that would be responsible for establishing and implementing it. One of the team members was Travivve's risk manager who was responsible for supervising the team and planning all risk management activities. In addition, the risk manager was responsible for monitoring the program and reporting the monitoring results to the top management.
Initially, the team decided to analyze the internal and external context of Travivve. As part of the process of understanding the organization and its context, the team identified key processes and activities. Then, the team identified the interested parties and their basic requirements and determined the status of compliance with these requirements. In addition, the team identified all the reference documents that applied to the defined scope of the risk management process, which mainly included the Annex A of ISO/IEC 27001 and the internal security rules established by Travivve. Lastly, the team analyzed both reference documents and justified a few noncompliances with those requirements.
The risk manager selected the information security risk management method which was aligned with other approaches used by the company to manage other risks. The team also communicated the risk management process to all interested parties through previously established communication mechanisms. In addition, they made sure to inform all interested parties about their roles and responsibilities regarding risk management. Travivve also decided to involve interested parties in its risk management activities since, according to the top management, this process required their active participation.
Lastly, Travivve's risk management team decided to conduct the initial information security risk assessment process. As such, the team established the criteria for performing the information security risk assessment which included the consequence criteria and likelihood criteria.
Based on scenario 2, the team decided to involve interested parties in risk management activities. Is this a good practice?
- A. No, only the risk management team should be involved in risk management activities
- B. Yes, relevant interested parties should be involved in risk management activities to ensure the successful completion of the risk assessment
- C. No. only internal interested parties should be involved in risk management activities
Answer: B
Explanation:
According to ISO/IEC 27005, involving relevant interested parties in the risk management process is considered a best practice. This approach ensures that all perspectives are considered, and relevant knowledge is leveraged, which helps in comprehensively identifying, analyzing, and managing risks. Interested parties, such as stakeholders, can provide valuable insights and information regarding the organization's assets, processes, threats, and vulnerabilities, contributing to a more accurate and effective risk assessment. Therefore, option B is correct because it supports the principle that involving relevant parties leads to a more successful risk assessment process. Options A and C are incorrect because excluding either external interested parties or restricting involvement only to the risk management team would limit the effectiveness of the risk management process.
NEW QUESTION # 36
According to CRAMM methodology, how is risk assessment initiated?
- A. By gathering information on the system and identifying assets within the scope
- B. By identifying the security risks
- C. By determining methods and procedures for managing risks
Answer: A
Explanation:
According to the CRAMM (CCTA Risk Analysis and Management Method) methodology, risk assessment begins by collecting detailed information on the system and identifying all assets that fall within the defined scope. This foundational step ensures that the assessment is comprehensive and includes all relevant assets, which could be potential targets for risk. This makes option A the correct answer.
NEW QUESTION # 37
Scenario 8: Biotide is a pharmaceutical company that produces medication for treating different kinds of diseases. The company was founded in 1997, and since then it has contributed in solving some of the most challenging healthcare issues.
As a pharmaceutical company, Biotide operates in an environment associated with complex risks. As such, the company focuses on risk management strategies that ensure the effective management of risks to develop high-quality medication. With the large amount of sensitive information generated from the company, managing information security risks is certainly an important part of the overall risk management process. Biotide utilizes a publicly available methodology for conducting risk assessment related to information assets. This methodology helps Biotide to perform risk assessment by taking into account its objectives and mission. Following this method, the risk management process is organized into four activity areas, each of them involving a set of activities, as provided below.
1. Activity area 1: The organization determines the criteria against which the effects of a risk occurring can be evaluated. In addition, the impacts of risks are also defined.
2. Activity area 2: The purpose of the second activity area is to create information asset profiles. The organization identifies critical information assets, their owners, as well as the security requirements for those assets. After determining the security requirements, the organization prioritizes them. In addition, the organization identifies the systems that store, transmit, or process information.
3. Activity area 3: The organization identifies the areas of concern which initiates the risk identification process. In addition, the organization analyzes and determines the probability of the occurrence of possible threat scenarios.
4. Activity area 4: The organization identifies and evaluates the risks. In addition, the criteria specified in activity area 1 is reviewed and the consequences of the areas of concerns are evaluated. Lastly, the level of identified risks is determined.
The table below provides an example of how Biotide assesses the risks related to its information assets following this methodology:
According to the risk assessment methodology used by Biotide, what else should be performed during activity area 4? Refer to scenario 8.
- A. Select a mitigation strategy for the identified risk profiles
- B. Create a strategic and operational plan
- C. Monitor security controls for ensuring they are appropriate for new threats
Answer: A
Explanation:
In Activity Area 4 of the risk assessment methodology used by Biotide, the focus is on identifying and evaluating risks, reviewing the criteria defined in Activity Area 1, and evaluating the consequences of identified areas of concern to determine the level of risk. However, an essential part of completing a risk assessment process also includes determining appropriate mitigation strategies for the identified risks.
ISO/IEC 27005 provides guidance on selecting and implementing security measures to manage the risk to an acceptable level. Therefore, selecting a mitigation strategy for the identified risk profiles is a crucial next step. This involves deciding on controls or measures that will reduce either the likelihood of the threat exploiting the vulnerability or the impact of the risk should it occur. Thus, the correct answer is B.
Reference:
ISO/IEC 27005:2018, Section 8.3.5 "Risk treatment" outlines the process of selecting appropriate risk treatment options (mitigation strategies) once risks have been identified and evaluated.
NEW QUESTION # 38
Scenario 2: Travivve is a travel agency that operates in more than 100 countries. Headquartered in San Francisco, the US, the agency is known for its personalized vacation packages and travel services. Travivve aims to deliver reliable services that meet its clients' needs. Considering the impact of information security in its reputation, Travivve decided to implement an information security management system (ISMS) based on ISO/IEC 27001. In addition, they decided to establish and implement an information security risk management program. Based on the priority of specific departments in Travivve, the top management decided to initially apply the risk management process only in the Sales Management Department. The process would be applicable for other departments only when introducing new technology.
Travivve's top management wanted to make sure that the risk management program is established based on the industry best practices. Therefore, they created a team of three members that would be responsible for establishing and implementing it. One of the team members was Travivve's risk manager who was responsible for supervising the team and planning all risk management activities. In addition, the risk manager was responsible for monitoring the program and reporting the monitoring results to the top management.
Initially, the team decided to analyze the internal and external context of Travivve. As part of the process of understanding the organization and its context, the team identified key processes and activities. Then, the team identified the interested parties and their basic requirements and determined the status of compliance with these requirements. In addition, the team identified all the reference documents that applied to the defined scope of the risk management process, which mainly included the Annex A of ISO/IEC 27001 and the internal security rules established by Travivve. Lastly, the team analyzed both reference documents and justified a few noncompliances with those requirements.
The risk manager selected the information security risk management method which was aligned with other approaches used by the company to manage other risks. The team also communicated the risk management process to all interested parties through previously established communication mechanisms. In addition, they made sure to inform all interested parties about their roles and responsibilities regarding risk management. Travivve also decided to involve interested parties in its risk management activities since, according to the top management, this process required their active participation.
Lastly, Travivve's risk management team decided to conduct the initial information security risk assessment process. As such, the team established the criteria for performing the information security risk assessment which included the consequence criteria and likelihood criteria.
Based on scenario 2, has Travivve defined the responsibilities of the risk manager appropriately?
- A. Yes, the risk manager should be responsible for all actions defined bv Traviwe
- B. No, the risk manager should not be responsible for planning all risk management activities
- C. No, the risk manager should not be responsible for reporting the monitoring results of the risk management program to the top management
Answer: A
Explanation:
ISO/IEC 27005 recommends that the risk manager or a designated authority should oversee the entire risk management process, including planning, monitoring, and reporting. In the scenario, the risk manager is responsible for supervising the team, planning all risk management activities, monitoring the program, and reporting the results to top management. This allocation of responsibilities is aligned with the guidelines of ISO/IEC 27005, which emphasizes that a risk manager should coordinate and manage all aspects of the risk management process to ensure its effectiveness and alignment with the organization's objectives. Therefore, assigning these responsibilities to the risk manager is appropriate, making option A the correct answer.
Reference:
ISO/IEC 27005:2018, Clause 5.3, "Roles and responsibilities," which specifies that those managing risk should have defined roles and should coordinate all activities in the risk management process.
NEW QUESTION # 39
......
100% Passing Guarantee - Brilliant ISO-IEC-27005-Risk-Manager Exam Questions PDF: https://testking.itexamdownload.com/ISO-IEC-27005-Risk-Manager-valid-questions.html