[Aug-2022] Study resources for the Valid 201-450 Braindumps! [Q63-Q85]

Share

[Aug-2022] Study resources for the Valid 201-450 Braindumps!

Updated 201-450 Tests Engine pdf - All Free Dumps Guaranteed!


Books and Study Guides

You can't be too dedicated to succeeding and so, it is important to not only engage with training programs but also to take time to study privately with books and study guides that represent one of the best sources of information relating to the exam.

  • LPIC-2 Linux Professional Institute Certification Study Guide by Christine Bresnaham and Richard Blum is valuable source that any candidate needs for LPIC-2 certification preparation. The book provides not only detailed and updated information that covers all the objectives of the 201-450 exam as well as 202-450, but it also has several helpful resources like electronic flashcards, bonus interactive practice exams, and a comprehensive keyword glossary. You can easily purchase this study guide on the Amazon website in the Kindle or paper version.
  • The LPIC-2 Exam Prep, 6th edition by Sue B. V. contains exam tips and helpful information about the exam and steps on how to pass it excellently that would be of great help to any candidate. The set of documents are carefully written, collated, edited, and updated by individuals who are part of or have passed through the exam process and have first-hand knowledge and experience which they share here. So, with this material, candidates can be sure they are getting prepared with accurate, properly researched, and comprehensive information they can trust.

What Career Opportunities Will You Get after Passing 201-450 Test?

The LPI 201-450 exam is compulsory if you want to qualify for the LPIC-2 certification and it opens a door of opportunities for you. Looking at the focus of LPI certification exams, all of them are along with the related positions that all LPIC certified specialists should apply for:

  • Linux System Administrators;
  • System Engineers;
  • Senior System Administrators.
  • SQL Developers;

When it comes to compensation, the annual income of the Linux system administrator is $85k while the system engineer earns an average salary of $82k as per Payscale. What's more, there are other Linux professions you can choose to enter and get a decent salary. So, multiple organizations are looking for Linux specialists to come forward and work with them.


Preparation for the LPI 201-450 exam

Getting prepared for the LPI 201-450 exam requires being able to not just work hard but work smart. Access to the best training resources is of utmost importance, and listed below are a few:

  • NobleProg Linux LPI LPIC-2 Exam 201 Preparation Training Course offers candidates the option to take the training online and offline. The fee for online classes is $1,275 per participant while the $2,600 is the stated fee for the offline classroom. This training course has the benefit of being very flexible and lasts a total of 14 hours, including breaks. However, it involves a series of lectures and practice exercises with full coverage of the LPI 201-450 exam objectives.
  • Linux Professional Institute LPIC-2 (201-400) Video Training Course with Shawn Powers is an intensive course that details all the terms, processes, and requisite skills suitable to the LPIC-2 syllabus. Moreover, this program offers candidates a chance to practically operate and configure Linux machines and enjoy other hands-on exercises that would largely boost their understanding of the LPI topics and hence their performance in the 201-450 exam.

 

NEW QUESTION 63
What is incorrect about these entries in /etc/hosts which could be causing host name lookup problems with host2?
host1 192.168.1.12
host2 192.168.1.12

  • A. Two host names are using the same IP address.
  • B. The fields are out of order.
  • C. host2 is not a fully qualified domain name.
  • D. The server doing the query is on a different subnet.

Answer: B

 

NEW QUESTION 64
What information is found in the following excerpt from the file /proc/mdstat? (Choose two.)

  • A. The information [UU_] means, that the raid is missing one disk and is not fully redundant
  • B. The spare disk /dev/sda1 is used to restore full redundancy after the current recovery
  • C. One of the disks in /dev/md0 has failed and a spare disk is used to recreate full redundancy
  • D. The device is using version 1.2 metadata to allow LILO and GRUB Legacy to use
    /dev/md0 as the boot partition. This would not have been necessary with GRUB2
  • E. The information [3/2] means that 3 RAID disks belong to the array and 2 disks are spare.
    Together they equal the number of available disks

Answer: A,C

 

NEW QUESTION 65
CORRECT TEXT
According to the Filesystem Hierarchy Standard (FHS), what is the path to the Linux kernel source and may be a symbolic link to the real Linux source code? (Please specify the full path with no version information.)

Answer:

Explanation:
/usr/src/linux, /usr/src/linux/

 

NEW QUESTION 66
In the following output, what percentage of time was the CPU waiting for pending I/O?
# vmstat 1 100
procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa
0 0 0 282120 134108 5797012 0 0 0 2 0 0 0 0 100 0
0 0 0 282120 134108 5797012 0 0 0 0 1007 359 0 0 100 0
0 0 0 282120 134108 5797012 0 0 0 0 1117 577 0 0 100 0
0 0 0 282120 134108 5797012 0 0 0 0 1007 366 0 0 100 0

  • A. 36.6
  • B. 57.7
  • C. 0
  • D. 35.9
  • E. 1

Answer: C

 

NEW QUESTION 67
A regular user, joe, has just run:
./configure && make && make install
to build and install a program. However, the installation fails. What could be done to install the program? (Choose TWO correct answers.)

  • A. Rerun ./configure with a --prefix option where the user has permissions to write.
  • B. Run make install with root privileges.
  • C. Run make install_local to install into /usr/local/.
  • D. Do not run ./configure in order to maintain the default configuration for correct installation.
  • E. Install the binaries manually with suinstall.

Answer: A,B

 

NEW QUESTION 68
Fill in the blank.
Which is the main configuration file for the SystemV init process? (Specify the full name of the file, including path.)

Answer:

Explanation:
/etc/inittab

 

NEW QUESTION 69
What is the main template file used by autofs?

  • A. auto.master
  • B. auto.conf
  • C. autofs.master
  • D. default.maps

Answer: A

 

NEW QUESTION 70
What is the command to add another IP address (192.168.1.2) to a network interface (eth0) that already has (at least) one IP address in the 192.168.1.0/24 subnet?

  • A. ip add addr 192.168.1.2/32 dev eth0
  • B. ipconfig eth0 192.168.1.2
  • C. ifconfig eth0 192.168.1.2 netmask 255.255.255.255
  • D. ip addr add 192.168.1.2/32 dev eth0

Answer: D

 

NEW QUESTION 71
Which of the following commands will erase the contents of the /dev/sdb3 partition?

  • A. umount /dev/sdb3
  • B. dd if=/dev/zero of=/dev/sdb3
  • C. dd of=/dev/zero if=/dev/sdb3
  • D. rm /dev/sdb3

Answer: B

 

NEW QUESTION 72
CORRECT TEXT
A database application requires a maximum shared memory segment (shmmax) of 2GB (2147483648 Bytes). Which configuration file should be modified to set this kernel parameter permanently? (Specify the full name of the file, including path.)

Answer:

Explanation:
/etc/sysctl.conf

 

NEW QUESTION 73
What are the main network services used by the PXE protocol? (Choose TWO correct answers.)

  • A. NFS
  • B. DHCP
  • C. TFTP
  • D. DNS
  • E. HTTP

Answer: B,C

 

NEW QUESTION 74
Which of the following commands can be used to list IPv4 addresses and MAC addresses for IP devices that the system has seen on the local network?

  • A. iwlist
  • B. arp
  • C. ifconfig
  • D. ipadm

Answer: B

 

NEW QUESTION 75
Which of the following parameters instructs the kernel at boot time to use only one of the available processors?

  • A. smpcpus=1
  • B. usecpus=1
  • C. maxcpus=1
  • D. vcpumx=1
  • E. vmxcpus=1

Answer: C

 

NEW QUESTION 76
Which command is used to install a new LILO boot loader?

  • A. lilo-config
  • B. lilo
  • C. install-lilo
  • D. lilo-install

Answer: B

 

NEW QUESTION 77
Which of the following files will be looked for and used by GNU make, if one of them exists, unless a different file is specified on the command line when trying to compile software from source code? (Choose TWO correct answers.)

  • A. makefile
  • B. Makefile.in
  • C. config.h.in
  • D. configure
  • E. Makefile

Answer: A,E

 

NEW QUESTION 78
The following is an excerpt from the output of tcpdump -nli eth1:

Which network service or protocol was used?

  • A. SSH
  • B. DNS
  • C. FTP
  • D. HTTP
  • E. DHCP

Answer: C

 

NEW QUESTION 79
Which of the following are common backup systems used in Linux? (Choose TWO correct answers.)

  • A. Bacula
  • B. BREWBackup
  • C. SARcheck
  • D. DrBackup
  • E. Amanda

Answer: A,E

 

NEW QUESTION 80
Fill in the blank.
After installation of a self-compiled kernel, modules that need to be loaded cannot be found. What make target was likely missed while installing the kernel? (Specify ONLY the make target without any command or parameters.)

Answer:

Explanation:
modules_install

 

NEW QUESTION 81
During booting, when the Linux kernel loads an initramfs file, which command from the initramfs will be executed first, if present?

  • A. /rc.local
  • B. /initrd
  • C. /linuxrc
  • D. /init
  • E. /sbin/init

Answer: D

 

NEW QUESTION 82
What effect does the -foption to the update-rc.dcommand have on files in the /etc/rcX.d/and / etc/init.d/directories?

  • A. It will remove both the symlinks in /etc/rcX.d/and the init script in /etc/init.d/
  • B. It will force the removal of symlinks in /etc/rcX.d/even if the corresponding init script still exists in / etc/init.d/
  • C. It will remove the init script in /etc/init.d/and the symlinks in /etc/rcX.d/and update the package information of installed files
  • D. It will force the removal of the symlinks in /etc/rcX.d/even when the links are read only

Answer: B

 

NEW QUESTION 83
Which of the following commands displays the physical path of the kernel module named dummy?

  • A. modshow -p dummy
  • B. modinfo -n dummy
  • C. modpath -v dummy
  • D. depmod -n dummy
  • E. modprobe -i dummy

Answer: E

 

NEW QUESTION 84
If all of the following files and/or symlinks exist in a SysV-init runlevel directory, which of the following will be executed first when booting the system directly into the runlevel?

  • A. PRE-S99lpi
  • B. S99lpi
  • C. S99a-lpi
  • D. K99lpi
  • E. S98lpi

Answer: E

 

NEW QUESTION 85
......

201-450 Dumps Updated Practice Test and 162 unique questions: https://testking.itexamdownload.com/201-450-valid-questions.html