Use Juniper JN0-335 Dumps To Succeed Instantly in JN0-335 Exam
Ultimate Guide to JN0-335 Dumps - Enhance Your Future Career Now
The JNCIS-SEC certification is an industry-recognized credential that validates the skills and knowledge of professionals in the field of network security. Security, Specialist (JNCIS-SEC) certification is highly regarded by employers and can lead to better job opportunities and higher salaries. It is also a valuable asset for those who want to advance their careers in the field of network security.
NEW QUESTION # 74
Click the Exhibit button.
Referring to the exhibit, you want to deploy Sky ATP with Policy Enforcer to block infected hosts at the access layer.
To complete this task, where should you configure the default gateway for the User-1 device?
- A. the irb interface on QFX-1
- B. the irb interface on QFX-2
- C. the interface of QFX-1 that connects to User-1
- D. the interface on SRX-1 that connects to QFX-2
Answer: B
NEW QUESTION # 75
Which three statements are true about the difference between cSRX-based virtual security deployments and vSRX-based virtual security deployments? (Choose three.)
- A. cSRX requires less storage and memory space for a given deployment than vSRX-based solutions.
- B. vSRX provides faster deployment time and faster reboots compared to cSRX.
- C. cSRX-based solutions are more scalable than vSRX-based solutions.
- D. vSRX and cSRX both provide Layer 2 to Layer 7 secure services.
- E. vSRX provides Layer 2 to Layer 7 secure services and cSRX provides Layer 4 to Layer 7 secure services.
Answer: A,C,E
Explanation:
https://www.juniper.net/documentation/en_US/day-one-books/topics/concept/juniper-vsrx-versus- csrx.html
NEW QUESTION # 76
Which two statements apply to policy scheduling? (Choose two.)
- A. Multiple policies can refer to the same schedule.
- B. A policy refers to one schedule.
- C. A policy stays active regardless of when the schedule is active.
- D. A policy refers to many schedules.
Answer: A,B
NEW QUESTION # 77
Which two settings must be enabled on the hypervisor in a vSRX deployment to ensure proper chassis cluster operation? (Choose two.)
- A. Fabric links must operate in promiscuous mode.
- B. Control links must have an MTU of 9000.
- C. Fabric links must have an MTU of 9000.
- D. Control links must operate in promiscuous mode.
Answer: C,D
NEW QUESTION # 78
Data plane logging operates in which two modes? (Choose two.)
- A. binary
- B. stream
- C. event
- D. syslog
Answer: B,C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/system-logging-for-a- security-device.html
NEW QUESTION # 79
You are trying to create a security policy on your SRX Series device that permits HTTP traffic from your private 172 25.11.0/24 subnet to the Internet. You create a policy named permit-http between the trust and untrust zones that permits HTTP traffic. When you issue a commit command to apply the configuration changes, the commit fails with the error shown in the exhibit.
Which two actions would correct the error? (Choose two.)
- A. Execute the Junos commit full command to override the error and apply the configuration.
- B. Issue the rollback 1 command from the top of the configuration hierarchy and attempt the commit again.
- C. Modify the security policy to use the built-in Junos-http applications.
- D. Create a custom application named http at the [edit applications] hierarchy.
Answer: C,D
Explanation:
The error message indicates that the Junos-http application is not defined, so you need to either create a custom application or modify the security policy to use the built-in Junos-http application.
Doing either of these will allow you to successfully commit the configuration.
NEW QUESTION # 80
You are asked to ensure that servers running the Ubuntu OS will not be able to update automatically by blocking their access at the SRX firewall. You have configured a unified security policy named Blockuburrtu, but it is not blocking the updates to the OS.
Referring to the exhibit which statement will block the Ubuntu OS updates?
- A. Configure the Allowweb policy to have a dynamic application of any.
- B. Move the Blockubuntu policy after the Allowweb policy.
- C. Change the default policy to permit-all.
- D. Configure the Blockubuntu policy with the junos-https application parameter.
Answer: D
NEW QUESTION # 81
Click the Exhibit button.
Referring to the exhibit, which two values in the JIMS SRX client configuration must match the values configured on the SRX client? (Choose two.)
- A. IPv6 Reporting
- B. Client ID
- C. Client Secret
- D. Token Lifetime
Answer: B,C
Explanation:
https://www.juniper.net/documentation/en_US/jims/topics/task/configuration/jims-srx- configuring.html
NEW QUESTION # 82
Regarding static attack object groups, which two statements are true? (Choose two.)
- A. Matching attack objects are automatically added to a custom group.
- B. You must manually add matching attack objects to a custom group.
- C. Group membership automatically changes when Juniper updates the IPS signature database.
- D. Group membership does not automatically change when Juniper updates the IPS signature database.
Answer: C,D
Explanation:
static attack object groups are predefined groups of attack objects that are included in Juniper's IPS signature database. These groups do not change automatically when Juniper updates the database2.
NEW QUESTION # 83
You need to have the JATP solution analyzer .jar, .xls, and .doc files.
Referring to the exhibit, which two file types must be selected to accomplish this task? (Choose two.)
- A. executable
- B. document
- C. Java
- D. library
Answer: B,D
NEW QUESTION # 84
Which statement about the control link in a chassis cluster is correct?
- A. Recovering from a control link failure requires a reboot.
- B. A cluster can have redundant control links.
- C. The control messages sent over the link are encrypted by default.
- D. The control link heartbeats contain the configuration file of the nodes.
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-chassis-cluster- dual-control-links.html
NEW QUESTION # 85
Your network uses a remote e-mail server that is used to send and receive e-mails for your users.
In this scenario, what should you do to protect users from receiving malicious files thorugh e-mail?
- A. Deploy Sky ATP SMTP e-mail protection
- B. Deploy Sky ATP MAPI e-mail protection
- C. Deploy Sky ATP POP3 e-mail protection
- D. Deploy Sky ATP IMAP e-mail protection
Answer: A
NEW QUESTION # 86
Exhibit
When trying to set up a server protection SSL proxy, you receive the error shown. What are two reasons for this error? (Choose two.)
- A. The SSL proxy certificate ID is for a forwarding proxy.
- B. The SSL proxy certificate ID does not have the correct renegotiation option set.
- C. The SSL proxy certificate ID does not exist.
- D. The SSL proxy certificate ID is part of a blocklist.
Answer: C,D
Explanation:
Two possible reasons for this error are that the SSL proxy certificate ID does not exist, or the SSL proxy certificate ID is part of a blocklist. If the SSL proxy certificate ID does not exist, you will need to generate a new certificate. If the SSL proxy certificate ID is part of a blocklist, you will need to contact the source of the blocklist to remove it. Additionally, you may need to check that the SSL proxy certificate ID has the correct renegotiation option set, as this is necessary for proper server protection. For more information, you can refer to the Juniper Security documentation at https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/security-ssl-proxy-configuration.html.
NEW QUESTION # 87
You are deploying the Junos application firewall feature in your network.
In this scenario, which two elements are mapped to applications in the application system cache? (Choose two.)
- A. destination port
- B. source IP address
- C. source port
- D. destination IP address
Answer: A,D
NEW QUESTION # 88
You must ensure that all encrypted traffic passing through your SRX device uses strong protocols and ciphers.
Which feature should you implement to satisfy this requirement?
- A. SSL proxy
- B. JATP
- C. AppSecure
- D. JIMS
Answer: A
NEW QUESTION # 89
Which two statements are correct about the cSRX? (Choose two.)
- A. The cSRX supports BGP, OSPF. and IS-IS routing services.
- B. The cSRX only supports Layer 2 "bump-in-the-wire" deployments.
- C. The cSRX supports firewall, NAT, IPS, and UTM services.
- D. The cSRX has three default zones: trust, untrust, and management
Answer: C,D
Explanation:
The two statements that are correct about the cSRX are that it supports firewall, NAT, IPS, and UTM services, and that it has three default zones: trust, untrust, and management. The cSRX is a software- defined security solution that provides comprehensive network security capabilities and is designed for virtualized environments. It supports firewall, NAT, IPS, and UTM services to protect against threats, as well as BGP, OSPF, and IS-IS routing services for routing functionality.
Additionally, the cSRX has three default zones: trust, untrust, and management. The trust zone is used to define traffic that is allowed to enter the network, the untrust zone is used to define traffic that should be blocked from entering the network, and the management zone is used to manage the device itself. The cSRX does not support Layer 2 "bump-in-the-wire" deployments.
NEW QUESTION # 90
Click the Exhibit button.
Which two statements are true about the session shown in the exhibit? (Choose two.)
- A. Two security policies are required for bidirectional traffic flow.
- B. The ALG was enabled by default.
- C. The ALG was enabled by manual configuration.
- D. One security policy is required for bidirectional traffic flow.
Answer: A,C
NEW QUESTION # 91
Which statement about security policy schedulers is correct?
- A. Multiple policies can use the same scheduler.
- B. A policy can have multiple schedulers.
- C. When the scheduler is disabled, the policy will still be available.
- D. A policy without a defined scheduler will not become active
Answer: A
Explanation:
Schedulers can be defined and reused by multiple policies, allowing for more efficient management of policy activation and deactivation. This can be particularly useful for policies that need to be activated during specific time periods, such as business hours or maintenance windows.
NEW QUESTION # 92
Which statement describes the AppTrack module in AppSecure?
- A. The AppTrack module provides control by the routing of traffic, based on the application.
- B. The AppTrack module provides visibility and volumetric reporting of application usage on the network.
- C. The AppTrack module provides enforcement with the ability to block traffic, based on specific applications.
- D. The AppTrack module identifies the applications that are present in network traffic.
Answer: D
NEW QUESTION # 93
After performing a software upgrade on an SRX5800 chassis cluster, you notice that node1 is in the primary state and node0 is in the backup state. Your network standards dictate that node0 should be in the primary state.
In this scenario, which command should be used to comply with the network standards?
- A. request chassis cluster failover redundancy-group 0 node 1
- B. request chassis cluster failover redundancy-group 254 node 1
- C. request chassis cluster failover redundancy-group 0 node 0
- D. request chassis cluster failover redundancy-group 254 mode 0
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-chassis-cluster- redundancy-group-failover.html
NEW QUESTION # 94
Referring to the exhibit which statement is true?
- A. SSL proxy functions will ignore the session.
- B. SSL proxy leverages pre-match result
- C. SSL proxy leverages post-match results.
- D. SSL proxy must wait for return traffic for the final match to occur.
Answer: B
NEW QUESTION # 95
Exhibit
Referring to the exhibit which statement is true?
- A. SSL proxy functions will ignore the session.
- B. SSL proxy leverages pre-match result
- C. SSL proxy leverages post-match results.
- D. SSL proxy must wait for return traffic for the final match to occur.
Answer: B
NEW QUESTION # 96
You are asked to establish an IPsec VPN between two sites. You are also required to establish an OSPFv2 adjacency across this VPN.
- A. protocol-based VPN
- B. policy-based VPN
- C. destination-based VPN
- D. route-based VPN
Answer: D
NEW QUESTION # 97
Which two statements are true about the fab interface in a chassis cluster? (Choose two.)
- A. The Junos OS supports only one fab link.
- B. The fab link supports traditional interface features.
- C. The fab link does not support fragmentation.
- D. The physical interface for the fab link must be specified in the configuration.
Answer: B,D
Explanation:
The physical interface for the fab link must be specified in the configuration. Additionally, the fab link supports traditional interface features such as MAC learning, security policy enforcement, and dynamic routing protocols. The fab link does not support fragmentation and the Junos OS supports up to two fab links.
NEW QUESTION # 98
......
Juniper JN0-335: Security, Specialist (JNCIS-SEC) exam is designed for professionals who want to demonstrate their skills in Juniper Networks security technologies. Security, Specialist (JNCIS-SEC) certification exam is intended for individuals who have a basic understanding of networking technologies and are looking to advance their careers in network security. JN0-335 exam covers a range of topics, including security policies, firewall filters, VPNs, NAT, and more.
Juniper Dumps - Learn How To Deal With The Exam Anxiety: https://testking.itexamdownload.com/JN0-335-valid-questions.html