Prepare 350-801 Question Answers - 350-801 Exam Dumps
Real Cisco 350-801 Exam Questions [Updated 2024]
Cisco 350-801 exam is challenging and requires extensive preparation. The candidates are recommended to have practical experience in implementing and operating Cisco collaboration solutions before taking the exam. The candidates can prepare for the exam by taking instructor-led or self-paced training courses offered by Cisco, reading Cisco documentation, or using practice exams and study materials available online.
Cisco 350-801 exam, also known as Implementing and Operating Cisco Collaboration Core Technologies, is a certification exam designed for IT professionals who specialize in Cisco collaboration solutions. 350-801 exam aims to test the candidate's knowledge and skills in implementing and operating core technologies of Cisco collaboration solutions, including Cisco Unified Communications Manager, Cisco Unity Connection, Cisco Collaboration Endpoints, and Cisco TelePresence Management Suite.
Cisco 350-801 certification exam, also known as the Implementing and Operating Cisco Collaboration Core Technologies exam, is designed to test the knowledge and skills of IT professionals in implementing and operating Cisco collaboration technologies. 350-801 exam is a requirement for the CCNP Collaboration and CCIE Collaboration certifications, and it validates the candidate's ability to configure, troubleshoot, and optimize Cisco collaboration solutions.
NEW QUESTION # 38
Which attribute contains an XMPP stanza?
- A. message
- B. type
- C. iq
- D. presence
Answer: B
Explanation:
Section: Collaboration Applications
Explanation/Reference: https://www.ciscolive.com/c/dam/r/ciscolive/apjc/docs/2011/pdf/TECUCC-2611.pdf slide 18
NEW QUESTION # 39
Why does Cisco UCM use DNS?
- A. it connects endpoints to single sign-on services.
- B. lt provides SRV resolution to the endpoints registered
- C. lt resolves FQDN to IP address resolution for trunks
- D. lt provides certificate-based security for media
Answer: B
NEW QUESTION # 40
Which external DNS SRV record must be present for Mobile and Remote Access?
- A. _cisco-uds._tls example.com
- B. _cisco-uds._tcp.example.com
- C. _collab-edge._tcp.example.com
- D. _collab-edge._tls.example.com
Answer: D
NEW QUESTION # 41
An engineer is integrating Unity Connection with Cisco UCM. Which two actions must be configured so that recording and playback from the IP phones works at all times, including peak traffic hours? (Choose two.)
- A. The phone system to which the phones are registered in Unity Connection has the Default Trap Switch check box enabled.
- B. Increase the number of voice ports.
- C. If it's a Unity Connection Cluster, ensure that replication is fine and not in split-brain mode.
- D. Ensure that you have set up SIP Digest Authentication on the SIP trunk security profile.
- E. Add dedicated dial-out ports with the allow trap connections setting selected.
Answer: B,C
NEW QUESTION # 42
Which two functions are provided by Cisco Expressway Series? (Choose two.)
- A. voice and video conference
- B. endpoint registration
- C. intercluster extension mobility
- D. voice and video transcoding
- E. interworking of SIP and H.323
Answer: D,E
Explanation:
Explanation/Reference: https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-11/Cisco- Meeting-Server-2-4-with-Cisco-Expressway-Deployment-Guide_X8-11-4.pdf
NEW QUESTION # 43
An engineer is going to redesign a network, and while looking at the QoS configuration, the engineer sees that a portion of the network is marked with AF42. Which type of traffic is marked with this tag?
- A. streaming video
- B. signaling
- C. voice
- D. video conference
Answer: A
NEW QUESTION # 44
Refer to the exhibit. An administrator configures fax dial-peers on a Cisco IOS gateway and finds that faxes are not working correctly. Which change should be made to resolve this issue?
- A. codec g729br81
- B. codec g711ulaw
- C. codec g723ar63
- D. codec g726r32
Answer: B
NEW QUESTION # 45
What happens to voice packets from a Cisco 8845 IP phone in the QoS trust boundary?
- A. The voice packets are not trusted, and the access layer switch reclassifies the packets.
- B. The phone and access layer switch negotiate the classification of packets.
- C. Cisco UCM determines how the voice packets are classified.
- D. The voice packets are classified by the phone, and the classification is accepted.
Answer: D
NEW QUESTION # 46
An engineer with ID012345678 must build an international dial plan in Cisco UCM. Which action is taken when building a variable-length route pattern?
- A. create a second route pattern followed by the # wildcard
- B. reduce the T302 timer to less than 4 seconds
- C. set up all international route patterns to 0.!
- D. configure single route pattern for international calls
Answer: A
Explanation:
When building a variable-length route pattern, you need to create a second route pattern followed by the # wildcard. This will allow the user to indicate the end of the number by dialing #. For example, if you want to create a route pattern for international calls, you would create a route pattern like this:
9.011!#
This route pattern will match any number that starts with 9.011, followed by any number of digits, and then ends with #.
The other options are incorrect because:
Configuring a single route pattern for international calls will not allow the user to indicate the end of the number.
Setting up all international route patterns to 0.! will not allow the user to indicate the end of the number.
Reducing the T302 timer to less than 4 seconds will not allow the user to indicate the end of the number.
NEW QUESTION # 47
An engineer must enable onboarding of on-premises devices by using activation to a Cisco UCM server The engineer activated the CISCO Device Activation Service and set the default registration method to use the codes. Which action completes the configuration?
- A. Set Enable Activation Code enterprise parameter to True-
- B. Generate 16-digit codes by using the Bilk Administration Tool
- C. Create a Bulk Administration Tool provisioning template.
- D. Manually provision new phones that have an activation code requirement
Answer: A
Explanation:
The engineer must set the Enable Activation Code enterprise parameter to True. This will enable the use of activation codes for onboarding on-premises devices to a Cisco UCM server. The other options are not necessary to complete the configuration.
Here are the steps to complete the configuration:
Log in to the Cisco Unified Communications Manager (CUCM) Administration interface.
Go to System > Enterprise Parameters.
Set the Enable Activation Code enterprise parameter to True.
Click Save.
The activation code onboarding feature is now enabled. You can use it to onboard new phones to the CUCM server.
NEW QUESTION # 48
Refer to the exhibit. An engineer must implement toll fraud prevention on a Cisco UCM cluster.
Only the SIP protocol must be allowed for connections passing through Cisco Unified Border Element. What must be configured?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 49
Which call routing pattern is used for phone numbers that are in the E.164 format?
- A. \+1. [2-9]XX[2-9]XXXXXXX called Party Transformation pattern
- B. \+.! Translation pattern
- C. /+.! Route Pattern
- D. \+.! Route pattern
Answer: D
NEW QUESTION # 50
Given the H.323 gateway configuration and using Cisco best practices, how must the called party transformation pattern be configured to ensure that a proper ISDN type of number is set?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 51
Which dial plan function restricts calls that are made by a lobby phone to internal extensions only?
- A. path selection
- B. calling privileges
- C. manipulation of dialed destination
- D. endpoint addressing
Answer: B
NEW QUESTION # 52
An administrator is asked to implement toll fraud prevention in Cisco UCM, specifically to restrict off- net to off-net call transfers How is this implemented?
- A. Use the correct route filters.
- B. Set the appropriate service parameter
- C. Enforce ad-hoc conference restrictions
- D. Implement time-of-day routing.
Answer: B
Explanation:
https://www.ciscopress.com/articles/article.asp?p=2218297&seqNum=10
NEW QUESTION # 53
Which statement describes the outcome when the trust boundary is defined at the Cisco IP phone?
- A. Packets or Ethernet frames are remarked at the distribution layer switch.
- B. Packets of Ethernet frames are not remarked at the access layer switch.
- C. Packets or Ethernet frames are not remarked by the IP phone.
- D. Packets of Ethernet frames are remarked at the access layer switch.
Answer: B
Explanation:
In the picture above the trust boundary is at the Cisco IP phone, this means that we won't remark any packets or Ethernet frames anymore at the access layer switch.
https://networklessons.com/quality-of-service/how-to-configure-qos-trust-boundary-on-cisco- switches
NEW QUESTION # 54
......
350-801 Exam Dumps Pass with Updated 2024: https://testking.itexamdownload.com/350-801-valid-questions.html